Welcome to Overunity.org.uk

Updated Hamel flux gate.

Disk 6

Updated Hamel flux gate.
Lot of experiments to do with this one, she makes the pinball and ring magnet spin fine, but now have mounted a bearing so I can lower it over a shaft and play
with various configurations.

Next variation will be a spiral setup to get the bounce rolling.

If you want the Gcode for this so you can mill out yourself, then please feel free to email me.
I added holes for screws, but the accuracy was so spot on I simply used a vice to squeeze the magnets into the 4mm deep slots on each side
of the 8mm PlexiGlass, perfect fit!.

Below sort of blows the Hamel theory of fixing a North facing pole towards the North Flux gate as it did not move one bit, well maybe a little if wiggled the mount!.
I was able to adjust the height mm by mm to see if any difference, but so far not much.
Next I will mill another small disk with spiral config.

Interesting note is that placing the South poles towards the center of the north flux gate made a nice levitation device and the small disk span with ease. You could actually blow on the thing and it would rotate a little!.

PLEASE NOTE.

Sorry I am not posting the results of my experiments as this would take too much time.
But when I have something I can shout about and that works 100%, then be assured I will post an update.
For now this is just a Blog as such of what I am working on.